StormSure Rubber Boot, Shoe and Wader Repair Kit

Stormsure Rubber Boot, Shoe and Wader Repair Kit. Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.

Contents

• 1 x 5g tube of Stormsure Flexible Repair Adhesive
• 2 x 75mm TUFF Tape Repair Patches
• 1 x Disposable gloves

DIRECTIONS
For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch.

For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.

TIPS
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.